FREQUENTLY ASKED QUESTIONS
Below are some of the questions being asked regarding the Ultra Drain system.
No they don't, due to the alloy grating being anodised to marine grade specifications.
Yes. With a vehicle up to 700 kg. per inflated tyre at a maximum speed of 25 km/hr providing the Ultra Drain is encased in concrete as per installation guide.
This depends on the surface area and rainfall that needs to be drained from the site.
Yes, it is resistant to all standard household chemicals.
Maximum of 50˚C water temperature.
The alloy top will withstand all PH-neutral cleaning products.
Yes. Customized lengths are available on indent up to 3.8 l/m and with a minimum run of 3,000 l/m.
Yes. However, a surcharge fee is applied for design and printing. Minimum box run of 500 per size.
PVC Solvent Cement which is readily available from any DIY outlet or plumbing supplier.
The density of the aluminium is 2.7g/cm3, which corresponds to about 1/3rd of the density of steel.
Aluminium alloys have a tensile strength ranging from 70 to 700 MPa. The alloys used most often in extrusion: 150-300 MPa.
Aluminium is a good reflector of both visible light and heat radiation.
